 |
CW-7A Circle Welder (CWO-1700-SA,
CWO-1700-MG). Used for sub-arc welding of nozzles into vessels
or domed heads. The machine will carry 60 lb. (27 kg) spools of wire. The
unit is complete with wire feeder, gun and cable assembly, flux hopper,
wire reel and meter kit.
This machines mounts on one of the 3-jaw expandable chucks. (See CW-7 series.) |
| Model | Process Capabilities | Welding Diameter | Wire Size | Rotation Speeds | Rise and Fall Cam | Rating Amps | Standard Equipment |
|---|---|---|---|---|---|---|---|
CW-5 CW-5 W/Remote |
MIG/MAG, FCAW | 1-12" (25-300 mm) | .035-1/16" (.08-1.6 mm) | 3-130 ipm (75-3300 mm/min) | 0-5" (0-125 mm) | 300 amps 100% duty cycle | Burn back control, horizontal and vertical adjustment gun and cable. |
CW-5AX CWO-1560 |
MIG/MAG, FCAW, SAW | 1-12" (25-300 mm) | .035-3/32" (.08-2.4 mm) | 3-130 ipm (75-3300 mm/min) | 0-5" (0-125 mm) | 500 amps 100% duty cycle | Same as CW-5 plus: meter kit, torch angle adjuster, flux hopper, nozzle and cone. |
CW-7 |
MIG/MAG, FCAW, SAW | 6-24" (150-600 mm) | .035-3/32" (.08-2.4 mm) | 4-137 ipm (100-3500 mm/min) | 0-7" (0-175 mm) | 500 amps 100% duty cycle | Burn back control, horizontal & vertical adjustment gun and cable. |
CW-11 |
MIG/MAG, FCAW, SAW | 10-50" (254-1270 mm) | Solid Wire .035-1/8" (.8-3.2mm) |
.06-72 ipm (.8-3.2 mm/min) Flux Cored Wire .068-.120" (1.7-3.0 mm) |
0-7" (0-175 mm) | 500 amp CO2 400 amp mixed gases 60% duty cycle | Burn back control, horizontal & vertical adjustment gun and cable. |
CW-18 |
SAW | 10-50" (254-1270 mm) | Solid Wire 3/32"-7/32" (2.4-5.6 mm) | .06-72 ipm (0.8-3.2 mm/min) | 0-7" (0-175 mm) | 60% duty cycle | Burn back control, horizontal & vertical adjustment gun and cable. |
[Top of Page] [CW-5 Circle Welder] [CW-11 Circle Welder] [Circle Burners-Oxy-Fuel] [Circle Burners-Plasma] [Saddle & Elbow Cutters] [General Information] [Cypress Main Page] [Bug-O Systems Main Page]
